PUBLICATIONS

Materials & Structures

Peer Reviewed Journals

• B. Srbinovski, M. Magno, F. Edwards, v. Pakrashi, E. Popovici (2016), An Energy Aware Adaptive Sampling Algorithm for Energy Harvesting WSN with Energy Hungry Sensors, Sensors 2016
• Jaksic, V., Mandic, D.P., Ryan, K., Basu, B., Pakrashi, V. (2016), A comprehensive study of the delay vector variance method for quantification of nonlinearity in dynamical systems., Royal Society Open Science
• Pakrashi, V., Fitzgerald, P., O’Leary, M., Jaksic, V., Ryan, K., Basu, B. (2016), Assessment of Structural Nonlinearities Employing Extremes of Dynamic Responses., Journal of Vibration and Control
• Fagan, EM, Kennedy, CR, Leen, SB, Goggins, J (2016), Damage mechanics based design methodology for tidal current turbine composite blades, Renewable Energy
• Salawdeh S; Goggins J (2016), Direct displacement based seismic design for single storey steel concentrically braced frames, Earthquakes and Structures
• Jaksic, V., Mandic, D.P., Karoumi, R., Basu, B., Pakrashi, V. (2016), Estimation of nonlinearities from pseudodynamic and dynamic responses of bridge structures using the Delay Vector Variance method., Physica A: Statistical Mechanics and its Applications
• Kennedy, CR, Leen, SB, O Bradaigh, CM (2016), Immersed fatigue performance of glass fibre-reinforced composites for tidal turbine blade applications , J Bio- and Tribo-Corrosion
• Voelklein, M.A.,Rusmanis, D.,Murphy, J.D. (2016), Increased loading rates and specific methane yields facilitated by digesting grass silage at thermophilic rather than mesophilic temperatures, Bioresource Technology
• Li, D-F, O’Donoghue, PE, Hyde, CJ, O’Dowd, NP, Leen, SB, (2016), Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels, Int J Fatigue
• O’Halloran, SM, Harte, AM, Connaire, AD, Leen, SB (2016), Modelling of fretting in the pressure armour layer of flexible marine risers, Tribology International
• Salawdeh, Suhaib; Goggins, Jamie; (2016), Performance based design approach for multi-storey concentrically braced steel frames, Steel and Composite Structures
• E.M. Fagan, M. Flanagan, S.B. Leen, T. Flanagan, A. Doyle, J. Goggins (2016), Physical Experimental Static Testing and Structural Design Optimisation for a Composite Wind Turbine Blade Article, Composite Structures
• Grogan, D.M., Leen, S.B. and O Bradaigh, C.M (2015), A Combined XFEM and Cohesive Zone Model for Composite Laminate Microcracking and Permeability, Composite Structures
• Jaksic V, O’Shea R, Cahill P, Murphy J, Mandic DP and Pakrashi V (2015), Dynamic Response Signatures of a Scaled Model Platform for Floating Wind Turbines in an Ocean Wave Basin, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
• D. O Donnell, B. Srbinovski, J. Murphy, E. Popovici, V. Pakrashi (2015), Sensor Measurement Strategies for Monitoring Offshore Wind and Wave Energy Devices, Journal of Physics Conference Series
• B. Srbinovski, M. Magno, B. O Flynn, V. Pakrashi, E. Popovici (2015), Energy aware adaptive sampling algorithm for energy harvesting wireless sensor networks, Sensors Applications Symposium (SAS)
• D.M. Grogan, S.B. Leen, C.M O Bradaigh (2014), An XFEM-Based Methodology for Fatigue Delamination and Permeability in Composites, Composite Structures
• B.R. Murray, S.B. Leen, C.M O Bradaigh (2014), Void Distributions and Permeability Prediction for Rotationally Moulded Polymers, Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications
• E.M. Feerick, J. Wilson, M. Jarman-Smith, C.M. O Bradaigh, J.P. McGarry (2014), Self-Tapping Ability of Carbon Fibre Reinforced PEEK Suture Anchors, Journal of Biomaterials Applications
• P Cahill, V Pakrashi, N Jackson, A Mathewson (2014), Comparison of piezoelectric materials for energy harvesting from civil infrastructure elements for use in health monitoring, Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management
• Michael O’Byrne, Bidisha Ghosh, Franck Schoefs, Vikram Pakrashi (2014), Regionally Enhanced Multiphase Segmentation Technique for Damaged Surfaces, Computer-Aided Civil and Infrastructure Engineering
• L.J. Prendergast, , K. Gavin (2014), A review of bridge scour monitoring techniques, Journal of Rock Mechanics and Geotechnical Engineering
• Kenneth Gavin, Paul Doherty, Ali Tolooiyan (2014), Field investigation of the axial resistance of helical piles in dense sand, Canadian Geotechnical Journal
• W. Li ; D. Igoe ; K. Gavin (2014), Evaluation of CPT-based P-y models for laterally loaded piles in siliceous sand, Geotechnique Letters
• Grogan, D.M., Kennedy, C.R., Leen, S.B. and O Bradaigh, C.M (2013), Design of Composite Tidal Turbine Blades, Renewable Energy
• Kennedy, C.R., CO’Bradaigh, C.M and Leen, S.B., (2013), A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites, Composite Structures
• Byrne D., Goggins J. (2013), Numerical modelling to aid in the structural health monitoring of wave energy converters, Key Engineering Materials Journal
• Finnegan W., Meere M., Goggins J (2013), The wave excitation forces on a truncated vertical cylinder in water of infinite depth, Journal of Fluids and Structures
• Jimmy Murphy, Richard O’Shea, Keith O’Sullivan, Vikram Pakrashi (2013), Dynamic Responses of a Scaled Tension Leg Platform, Wind Turbine Support Structure in a Wave Tank, Key Engineering Materials
• Vikram Pakrashi, Biswajit Basu, Kevin Ryan (2013), Rapid Assessment of Natural Periods of Large Short-Period Civil Engineering Structures, Key Engineering Materials
• Paul Cahill, Nathan Jackson, Alan Mathewson, Vikram Pakrashi (2013), PolyVinyliDene Fluoride (PVDF) Material Based Energy Harvesting from Train and Damaged Bridge Interaction, Key Engineering Materials
• Paul Cahill; Eoin Allen; Vikram Pakrashi; Alan O’Connor (2013), Horizontal Loading Effects of Fresh Concrete on Precast Arches, JOURNAL OF BRIDGE ENGINEERING
• Goggins, J. , Salawdeh, S. (2013), Validation of nonlinear time history analysis models for single-storey concentrically braced frames using full-scale shake table tests, Earthquake Engineering and Structural Dynamics
• M. Awais, E. Gibson, J. G. Vos, D. P. Dowling, A. Hagfeldt, D. Dini (2013), Fabrication of Efficient NiO Photocathodes Prepared via RDS with Novel Routes of Substrate Processing for p-Type Dye-Sensitized Solar Cells, ChemElectroChem
• Barry, J.N. , Cowley, A., McNally, P.J., Dowling, D.P (2013), Influence of substrate metal alloy type on the properties of hydroxyapatite coatings deposited using a novel ambient temperature deposition technique, Journal of Biomedical Materials Research – Part A
• J. Patrick McGarry , Eamonn O Mairtin, Guillaume Parry, Glenn E. Beltz (2013), Potential-based and non-potential-based cohesive zone formulations under mixed-mode separation and over-closure. Part I: Theoretical analysis, Journal of the Mechanics and Physics of Solids
• O.J. McCarthy , J.P. McGarry, S.B. Leen (2013), Microstructure-sensitive prediction and experimental validation of fretting fatigue, Wear
• William Ronan, Amit Pathak, Vikram S. Deshpande, Robert M. McMeeking and J. Patrick McGarry (2013), Simulation of the Mechanical Response of Cells on Micropost Substrates, Journal of Biomechanical Engineering
• William Ronan, Vikram S. Deshpande, Robert M. McMeeking, J. Patrick McGarry (2013), Cellular contractility and substrate elasticity: a numerical investigation of the actin cytoskeleton and cell adhesion, Biomechanics and Modeling in Mechanobiology
• O.J. McCarthy, J.P. McGarry, S.B. Leen (2013), The effect of grain orientation on fretting fatigue plasticity and life prediction, Tribology International
• Feerick, E.M., McGarry, J.P. (2013), Using computational simulation for analysis and development of next generation orthopaedic devices, Journal of the American Academy of Orthopaedic Surgeons
• L.J. Prendergast , D. Hester , K. Gavin, J.J. O’Sullivan, (2013), An investigation of the changes in the natural frequency of a pile affected by scour, Journal of Sound and Vibration

Conference Proceedings
  • A Singlitico, I Kilgallon, J Goggins, RFD Monaghan, (2017) GIS-based optimization model for the smart design of a nationwide bio-SNG production system for Ireland, Proceedings of the 25th European Biomass Conference & Exhibition, Sweden
  • C. Wright, J. Murphy, V. Pakrashi, (2016) The Dynamic Effects of Marine Growth on a Heaving WEC, Proceedings of Offshore Energy & Storage Symposium, Malta
  • C. Wright, J. Murphy, V. Pakrashi, (2016) Dynamic Effects of Anchor Positional Tolerance on Tension Moored Floating Wind Turbine, Proceedings of the TORQUE 2016 Conference, Germany
  • C. Wright, J. Murphy, V. Pakrashi, (2016) Analysis of End-Stop Parameters on the Performance of Heaving Point Absorber Wave Energy Converters, Proceedings of the CORE 2016 Conference, Australia
  • Newell S, Goggins J, Hajdukiewicz M, Holleran D, (2016) Behaviour of hybrid concrete lattice girder flat slab system using insitu structural health monitoring, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Grogan D, Flanagan M, Goggins J, Kennedy C, Doyle A, Walls M., Leen S. , (2016) Characterisation and water aging of composite materials for tidal turbine blades, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Fagan E, Goggins J, Leen S, de la Torre O, (2016) Experimental investigation and numerical modelling of domestic scale wind turbine blades, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Ganguly T., Hajdukiewicz M., Keane M., Goggins J., (2016) Generating robust algorithms for energy efficient lighting as a performance aspect of the building operational energy optimisation framework, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Hassan MS, English J, Goggins J, Salawdeh S, (2016) Large inelastic cyclic testing of the gusset-plate brace member assemblies in ultra-low cycle fatigue regime, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Flanagan M, Doyle F, Goggins J, Fagan E, Doyle A, Flanagan T, Feerick PJ, Leen S, (2016) Large Scale Structural Testing of Wind Turbine Blades Manufactured Using a One-Shot Out-Of-Autoclave Process, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • De la Torre O, Newell S, Flanagan M, Goggins J, (2016) Potential applications for image-based systems in structural engineering, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Ryan T, Broderick BM, Hunt A, Goggins J, Salawdeh S, (2016) Recommendations for Numerical Modelling of Concentrically Braced Steel Frames with Gusset Plate Connections subjected to Earthquake Ground Motion, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Goggins J, McGovern P, McHugh K, Finnegan W., (2016) Reducing the environmental impact of concrete products, while at the same time saving money, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • Salawdeh S, Goggins J, (2016) Seismic Design and Performance of Non-structural Elements, Proceedings of Civil Engineering Research in Ireland conference, Ireland
  • D. O’Donnell, B. Srbinovksy, J. Murphy, E. Popovici, V. Pakrashi, (2015) Sensor Measurement Strategies for Monitoring Offshore Wind and Wave Energy Devices, Proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS 2015), Belgium
  • M. O’Byrne, B. Ghosh, F. Schoefs, V. Pakrashi, (2015) Protocols for Image Processing based Underwater Inspection of Infrastructure Elements, Proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS 2015), Belgium
  • V. Jaksic, C. Wright, A. Chanayil, S.F. Ali, J. Murphy, V. Pakrashi, (2015) Performance of a Single Liquid Column Damper for the Control of Dynamic Responses of a Tension Leg Platform, Proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS 2015), Belgium
  • V. Pakrashi, R. O’Shea, V. Jaksic, J. Murphy, (2015) The Hurst Exponent as an Indicator of the Behaviour of a Model Monopile in an Ocean Wave Testing Basin, Proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS 2015), Belgium
  • C. Wright, K. O’Sullivan, J. Murphy, V. Pakrashi, (2015) Experimental Comparison of Dynamic Responses of a Tension Moored Floating Wind Turbine Platform with and without Spring Dampers, Proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS 2015), Belgium
  • V. Jaksic, C. Wright, D.P. Mandic, J. Murphy, V. Pakrashi, (2015) A Delay Vector Variance based Marker for an Output-Only Assessment of Structural Changes in Tension Leg Platforms, Proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS 2015), Belgium
  • Fagan EM, Yeung RW, Leen SB, Goggins J., (2015) Structural and hydrodynamic modelling of composite tidal turbine blades, Proceedings of 11th European Wave and Tidal Energy Conference Series (EWTEC2015), France
  • Moran P., Goggins J., Hajdukiewicz M., (2015) Achieving nearly zero-energy buildings – A lifecycle assessment approach to retrofitting buildings, Proceedings of The Advanced Building Skins Conference, Austria
  • Hassan MS, Goggins J, Salawdeh S, (2015) Characterising the effect of global and local geometric imperfections on the numerical performance of brace member, Proceedings of the 11th International Conference on Damage Assessment of Structures DAMAS 2015, Belgium
  • Hassan MS, Goggins J, Salawdeh S, (2015) Damage Assessment of Tubular Steel Brace Members under Low Cycle Fatigue, Proceedings of the 11th International Conference on Damage Assessment of Structures DAMAS 2016, Belgium
  • Edward M Fagan, Sean B Leen, Ciaran R Kennedy, Jamie Goggins, (2015) Finite element based damage assessment of composite tidal turbine blades, Proceedings of the 11th International Conference on Damage Assessment of Structures DAMAS 2015, Belgium
  • Zuhaib S., Hajdukiewicz M., Keane M., Goggins J., (2015) Generic assessment of optimisation methods for performance based design of retrofitted building facades for nearly zero-energy buildings, Proceedings of the 10th Conference on Advanced Building Skins, Switzerland
  • Kennedy, C.R., O Bradaigh, C.M. and Leen, S.B., (2014) Fatigue of Glass Fibre Reinforced Polymers for Ocean Energy, Proceedings of the 16th European Conference on Composite Materials, ECCM 16, Spain
  • Grogan, D., Leen, S.B. and O Bradaigh, C.M, (2014) Analysis of Microcracking and Permeability in CF/PEEK Linerless Cryogenic Tanks, Proceedings of the 1st International Conference on Mechanics of Composite Materials, United States
  • Ronan Doorley, Vikram Pakrashi, Brian Caulfield, Bidisha Ghosh, (2014) Short-term forecasting of bicycle traffic using structural time series models, Proceedings of the 17th International Conference onIntelligent Transportation Systems (ITSC), 2014 IEEE, China
  • Anneka R. Lawson ; Bidisha Ghosh ; Vikram Pakrashi, (2014) Quantifying the perceived safety of cyclists in Dublin, Proceedings of the ICE – Transport, United Kingdom
  • Paul Cahill, Rosemary O’Keeffe, Nathan Jackson, Alan Mathewson, Vikram Pakrashi, (2014) Structural Health Monitoring of Reinforced Concrete Beam Using Piezoelectric Energy Harvesting System, Proceedings of the EWSHM-7th European Workshop on Structural Health Monitoring, France
  • Michael O’Byrne, Vikram Pakrashi, Franck Schoefs, Bidisha Ghosh, (2014) A Comparison of Image Based 3D Recovery Methods for Underwater Inspections, Proceedings of the EWSHM-7th European Workshop on Structural Health Monitoring, France
  • Noble D, Nogal M, O’Connor A and Pakrashi V, (2014) Impact hammer testing on post-tensioned steel RHS sections; an investigation of the “Compression Softening” effect, Proceedings of the Civil Engineering Research Ireland (CERI) Conference, Northern Ireland
  • Cahill P, Amato G, Jackson N, Mathewson A and Pakrashi V., (2014) Design of Scaled Bridge Prototype for Energy Harvesting Testing, Proceedings of the Civil Engineering Research Ireland (CERI) Conference, Northern Ireland
  • Hanley C and Pakrashi V, (2014) Parameter Importance Measure Studies on Prestressed Concrete Bridges in Ireland, Proceedings of the Civil Engineering Research Ireland (CERI) Conference, Northern Ireland
  • O’Reilly, G.J., Goggins, J., (2014) Comparing the seismic performance of concentrically braced frames with and without self-centering behaviour, Proceedings of the 2nd International Conference on Structures and Architecture, ICSA 2013, Portugal
  • Hajdukiewicz, M; Goggins, J, (2014) The influence of heat transfer and storage in structural precast building components on indoor environments, Proceedings of the Civil Engineering Research in Ireland (CERI2014) conference, Northern Ireland
  • Baily, E; McCabe, B; Goggins, J; Kieran, P, (2014) Real-time monitoring and performance of retaining structures, Proceedings of the Civil Engineering Research in Ireland (CERI2014) conference, Northern Ireland
  • Hajdukiewicz, Magdelena; Lebrene, J; Goggins, Jamie, (2014) The environmental performance of a reinforced precast concrete slab with void forming system, Proceedings of the International Conference on Construction Materials and Structures (ICCMATS 2014), South Africa
  • Goggins, J; Newell, S; King, D; Hajdukiewicz, M, (2014) Real-time monitoring of a hybrid precast and in situ concrete flat slab system, Proceedings of the Civil Engineering Research in Ireland (CERI2014) conference, Northern Ireland
  • Li, W., Gavin, K., Igoe, D., Doherty, P, (2014) Review of design models for lateral cyclic loading of monopiles in sand, Proceedings of the 8th International Conference on Physical Modelling in Geotechnics, ICPMG 2014, Australia
  • G. Murphy, P. Doherty, K. Gavin, D. Cadogan & D. Ward, (2014) Characterisation of two dense sand sites using in-situ tests, Proceedings of the 3rd International Symposium on Cone Penetration Testing, United States
  • L. J. Prendergast, K. Gavin & D. Igoe, (2014) Dynamic soil-structure interaction modeling using stiffness derived from in-situ Cone Penetration Tests, Proceedings of the 3rd International Symposium on Cone Penetration Testing, United States
  • P. Doherty, G. Murphy, D. Igoe, K. Gavin & J. Donohoe, (2014) Determination of a dynamic Youngs modulus from in-situ tests, Proceedings of the 3rd International Symposium on Cone Penetration Testing, United States
  • Prendergast, L and Gavin, K.G., (2014) Bridge scour monitoring using accelerometers placed on bridge piers – A numerical investigation, Proceedings of the 3rd International Conference on Road and Rail Infrastructure (CETRA 2014), Croatia
  • Barrett, R.A. O’Donoghue, P.E., Leen, S.B., (2014) A unified viscoplastic model for high temperature low cycle fatigue of service-aged P91 steel, Proceedings of the ASME 2013 Pressure Vessels & Piping Conference, France
  • Goggins, J; Armstrong, A., (2014) Environmental lifecycle assessment of buildings in Ireland – A move towards nearly zero energy buildings, Proceedings of Sustainable Structures Portland, USA, United States
  • T.P. Farragher, S. Scully, N.P. O’Dowd, C.J. Hyde, S.B. Leen, (2014) High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material, Proceedings of the ASME 2013 Pressure Vessels & Piping Conference, France
  • N Reynolds, P McGarry, (2014) Investigation of the biomechanical behaviour of stress fibres and nucleus deformation in spread cells using a novel micropipette aspiration technique., Proceedings of the 7th World Congress of Biomechanics, United States
  • D. B. Duraibabu, S. Poeggel, E. Omerdic, K. Kalli, R. Capocci, A. Lacraz, G. Dooly, E. Lewis, T. Newe, G. Leen, D. Toal, (2014) Novel miniature pressure and temperature optical fibre sensor based on an extrinsic Fabry-Perot Interferometer (EFPI) and Fibre Bragg Gratings (FBG) for the Ocean environment, Proceedings of SENSORS, 2014 IEEE, Spain
  • Broderick, BM; Goggins, J; Elghazouli, AY; Beg, D; Hunt, A; Salawdeh, S; Mongabure, P, (2014) Shake table testing of concentrically braced steel frames with various gusset plate designs, Proceedings of the 2nd European conference on earthquake engineering and seismology (2ECEES), Turkey
  • Jaksic, V., O’Connor, A., Pakrashi, V., (2013) Effects of vehicle speed in structural health monitoring from operational conditions of bridges, Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013, United States
  • Pakrashi, V, O’Connor, A, Quilligan, A., (2013) Non-detection issues in wind turbine tower damage detection, Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013, United States
  • Hanley, C., Gilmour, D., Pakrashi, V., (2013) Effects of large uncertainties in a reliability based framework for humanitarian emergency shelters, Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013, United States
  • O’Byrne M, Ghosh B, Schoefs F and Pakrashi V, (2013) Evaluation of Image Analysis Technique Applied to Offshore Infrastructural Elements using Texture Information, Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2014, United States
  • O’Byrne, M., Ghosh, B., Pakrashi, V., Schoefs, F., (2013) Effects of turbidity and lighting on the performance of an image processing based damage detection technique, Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013, United States
  • Armstrong, A., Goggins, J, (2013) Life cycle assessment of Irish residential buildings and typical building envelope analysis, Proceedings of the Structures and Architecture: Concepts, Applications and Challenges – Proceedings of the 2nd International Conference on Structures and Architecture, ICSA 2013, Portugal
  • Byrne, D. , Goggins, J., (2013) Evaluating the structural capacity of concrete elements through in-situ instrumentation, Proceedings of the 10th International Conference on Damage Assessment of Structures, DAMAS 2013, Ireland
  • Goggins, J; Armstrong, A; McElmeel, H, (2013) Comparison between energy usage and thermal comfort of typical masonry houses in Ireland before and after receiving retrofit, Proceedings of the International Conference on Sustainable Buildings 2013 (SB13), Austria
  • W. Adress, L. Cox, W. G. Graham, V. J. Law, D. P. Dowling, (2013) Dynamic properties of a kINPen Plasma Jet in burst mode, Proceedings of the International Conference on Phenomena in Ionized Gases (ICPIG), Spain
  • V. Pakrashi, J. Murphy, (2013) Experimental Responses of a Monopile Foundation with a Wave Energy Convertor Attached, Proceedings of the International Conference of Hydraulics, Water Resources, Coastal and Environmental Engineering HYDRO 2013, India
  • P. Weafer, N. Reynolds, W. Ronan, E. Dowling, S. Jarvis and P. McGarry, (2013) Analysis of the Active Response of Cells to Cyclic Loading Using a Modified AFM System, Proceedings of the ASME 2013 Summer Bioengineering Conference, United States
  • D. P. Dowling, V. J. Law, J. Mohan, A. Ivankovic, F. T. O’Neill, (2013) Application of an atmospheric pressure plasma jet treatments for the removal of organic contaminants prior to composite bonding, Proceedings of the E-MRS, 2013, France
  • M. M. Iqbal, C. P. Stallard, D. P. Dowling, M. M. Turner, (2013) Modelling of droplet-plasma interaction and nucleation of nano-sized particles in atmospheric pressure discharges, Proceedings of the 31st ICPIG, Granada, Spain
  • E. M. Feerick and J. P. McGarry, (2013) Multiscale Experimental and Computational Investigation of Cortical Bone Fracture, Proceedings of the American Society of Mechanical Engineering 2013 Summer Bioengineering Conference, United States
  • Finnegan W., Goggins J., (2013) Numerical modelling to aid in the structural health monitoring of wave energy converters, Proceedings of the 10th International Conference on Damage Assessment of Structures (DAMAS 2013), Ireland
  • V. J. Law, A. Chebbi, F. T. O’Neill and D. P. Dowling, (2013) Resonances and patterns within the kINPen-MED atmospheric pressure plasma jet, Proceedings of the 6th Chaotic Modelling and Simulation International Conference (CHAOS2013), Turkey
  • Byrne D., Goggins J., (2013) The use of in-situ instrumentation in determining optimum retrofitting solutions of concrete structural elements, Proceedings of the 10th International Conference on Damage Assessment of Structures (DAMAS 2013), Ireland
Books & Chapters
  • V.J. Law, W.G. Graham, D.P. Dowling, (2016), Plasma hysteresis and instability: a memory perspective, The Foundations of Chaos Revisited: From Poincare to Recent Advancements.
  • Broderick, BM; Hunt, A; Mongabure, P; Goggins, JM; Salawdeh, S; O’Reilly G; Beg D; Moze P; Sinur F; Elghazouli AY, (2015), Assessment of the seismic response of concentrically-braced steel frames, Experimental Research in Earthquake Engineering
  • Dowling, D.P., (2014), Surface Processing Using Cold Atmospheric Pressure Plasmas, Comprehensive Materials Processing
  • Goggins, J, (2014), Level, distribution and Depth, Integrating GDE into the Academia
Presentations / Workshops
  • (2016), A combined creep and fatigue damage estimation tool for power-plant monitoring, ASME 2016 Pressure Vessels and Piping Conference PVP2016, Canada
  • (2016), A physically-based creep damage model for 9Cr steels incorporating the effects of multiple precipitate types, 1st Int Conf on Materials Design and Applications (MDA2016), Portugal
  • (2016), Cell Attachment to Microwave Plasma Oxidized Titanium and Titanium Alloy Substrates, AVS 63rd International Symposium and Exhibition, United States of America
  • (2016), Characterisation of a nano-strengthened 9Cr steel for high temperature flexible operating conditions, 1st Int Conf on Materials Design and Applications (MDA2016), Portugal
  • (2016), Crystal plasticity modelling of effect of grain size on high temperature cyclic response of a tempered martensite ferritic steel, 1st Int Conf on Materials Design and Applications (MDA2016), Portugal
  • (2016), Crystal plasticity modelling of statistical size effects in fretting crack initiation, 8th International Symposium on Fretting Fatigue , Brazil
  • (2016), Cyclic crystal plasticity modelling of fatigue with application to fretting, 42nd Leeds-Lyon Symposium on Tribology, France
  • (2016), Development of university buildings as ‘living laboratories’ for teaching and research, The University of Edinburgh Inaugural new Engineering building group meeting, United Kingdom (excluding Northern Ireland)
  • (2016), Experimental investigation and numerical modelling of domestic scale wind turbine blades, CERI 2016, Ireland
  • (2016), Large scale structural testing of wind turbine blades manufactured using a one-shot out-of-autoclave process, CERI 2016, Ireland
  • (2016), Multiscale modelling of fatigue across a range of structural applications, Shenzhen Graduate School, Harbin Institute of Technology, China
  • (2016), Polymer lined COPVs formed using an integrally heat rotational moulding tool and laser assisted tape placement, SAMPE 2016, United States of America
  • (2015), Composite Materials Manufacturing and Design for Renewable Energy and Automotive Applications, Oak Ridge National Laboratory Seminar, United States
  • (2015), Composite Materials Manufacturing and Design for Aerospace and Renewable Energy Applications, Purdue University Seminar, United States
  • (2015), Resin Characterisation for Numerical Modelling of Through-Thickness Resin Flow during Out of Autoclave Processing of Thick-Section Wind or Tidal Turbine Blades, International Conference on Composite Materials – 20, Denmark
  • (2015), Characterization of Cryogenically-Cycled Autoclaved and ATL CF/PEEK Laminates using 3-D X-Ray CT, International Conference on Composite Materials – 20, Denmark
  • (2015), An application of classical techniques in fracture mechanics to crack a new problem in wave power, ISSEC 2015, Ireland
  • (2015), Structural and hydrodynamic modelling of composite tidal turbine blades, 11th European Wave and Tidal Energy Conference Series (EWTEC2015), France
  • (2015), Finite element based damage assessment of composite tidal turbine blades, 11th International Conference on Damage Assessment of Structures DAMAS 2015, Belgium
  • (2015), Characterising the effect of global and local geometric imperfections on the numerical performance of a brace member, 11th International Conference on Damage Assessment of Structures DAMAS 2015, Belgium
  • (2015), A microstructure-sensitive modelling framework for advanced high temperature materials in next generation power plant, 9th European Solid Mechanics Conference (ESMC 2015), Spain
  • (2015), Characterisation of cryogenically cycled autoclave & ATL CF/PEEK laminates using 3-D X-ray CT, 20th International Conference on Composite Materials, Denmark
  • (2015), Collaborative tool development using BIM programs and energy rating systems, NUI-UL Research day, Ireland
  • (2015), Effect of high temperature corrosion on the service life of P91 piping in biomass co-firing, ASME 2015 Pressure Vessels and Piping Conference PVP2015, United States of America
  • (2015), High temperature, low cycle fatigue characterisation of MarBN at 600oC, ASME 2015 Pressure Vessels and Piping Conference PVP2015, United States of America
  • (2015), Investigation of the passive and active response of cells to cyclic loading, European Solid Mechanics Conference, Spain
  • (2015), On the modelling of slightly compressible anisotropic hyperelastic tissue, European Solid Mechanics Conference, Spain
  • (2015), Service Learning – A lens to which to implement public engagement in STEM education, Campus Engage Participation Programme, Ireland
  • (2015), Standards driven collaborative BIM program selection and development tool, Achieving nearly zero energy buildings through retrofit, Ireland
  • (2014), One-Shot Manufacturing of 225kW Thermoset Composite Wind Blades, Irish Polymer & Materials Conference 2014, Ireland
  • (2014), Analysis of Microcracking and Permeability in CF/PEEK Linerless Cryogenic Tanks, 1st International Conference on Mechanics of Composite Materials, United States
  • (2014), Fatigue Design of Composite Tidal Turbine Blades: Effects of Water Saturation and Control Strategy, ICOE 2014 – International Conference on Ocean Energy, Canada
  • (2014), 3D Printing “ The Future of Prototyping”, Weekly Ocean Energy Seminar Series 2014, Ireland
  • (2014), Analysis and Development of Cohesive Zone Models for Mixed Mode Separation and Overclosure, World Congress on Computational Mechanics, Spain
  • (2014), Bottom-up multiscale modelling of microstructural response in a P91 martensitic steel, 5th International Conference on Advanced Computational Methods in Engineering, Belgium
  • (2014), Design of fibre reinforces PEEK orthopaedic fracture fixation plates, World Congress of Biomechanics, 7-11th July 2014, United States of America
  • (2014), Developing university buildings as “living laboratories”, Centre for Built Environment Seminar, United States of America
  • (2014), Fatigue of glass fibre reinforced polymers for ocean energy, 16th European Conference on Composite Materials (ECCM16), Spain
  • (2014), Investigation of the biomechanical behavior of stress fibers and nucleus deformation in spread cells using a novel micropipette aspiration technique, World Congress of Biomechanics, 7-11th July 2014, United States of America
  • (2014), Investigation of the passive and active response of single cells to cyclic loading, World Congress of Biomechanics, 7-11th July 2014, United States of America
  • (2014), Micromechanical modelling of crack initiation in HCF of a CoCr alloy, 24th International Workshop on Computational Micromechanics of Materials (IWCMM4), Spain
  • (2014), Real-time monitoring and performance of retaining structures, Civil Engineering Research of Ireland (CERI2014) conference, Northern Ireland
  • (2014), Real-time monitoring of a hybrid precast and in situ concrete flat slab system, Civil Engineering Research of Ireland (CERI2014) conference, Northern Ireland
  • (2014), Response of single cells to applied dynamic loading, World Congress on Computational Mechanics, Spain
  • (2014), Seismic behaviour of concentrically braced framing systems, Irish Society for scientific engineering & computation, Ireland
  • (2014), Shake table testing of concentrically braced steel frames with various gusset plate designs, 2nd European conference on earthquake engineering and seismology (2ECEES), Turkey
  • (2014), The influence of heat transfer and storage in structural precast building components on indoor environments, Civil Engineering Research of Ireland (CERI2014) conference, Northern Ireland
  • (2014), Thermo-mechanical fatigue in power plant steels: Enhanced numerical modelling with experimental validation, CERAI 2014, Northern Ireland
  • (2013), Mechanical Analysis of Long Carbon Fibre Reinforced PEEK Fracture Fixation Plates, Bioengineering Section of the Royal Academy of Medicine in Ireland, Ireland
  • (2013), Fatigue of Immersed Glass Reinforced Polymer Composite Tidal Turbine Blades, Society for the Advancement of Materials and Process Engineering (SAMPE), Germany
  • (2013), A Comparison of Carbon Fibre PEEK, Titanium and Unreinforced PEEK as Materials for Distal Radius Fracture Fixation Plates, European Society of Biomechanics, Greece
  • (2013), One-Shot Wind Turbine Blade Manufacturing using Powder-Epoxy and Electrically-Heated Ceramic Composite Tooling, CFK-Valley Stade, Germany
  • (2013), Investigation of Carbon Fiber Reinforced PEEK Self Tapping Suture Anchors, Philadelphia, United States
  • (2013), Fatigue Life of Immersed Glass Reinforced Polymer Composites, National Composites Centre Workshop, United Kingdom
  • (2013), Reactive Moulding of Continuous Fibre Thermoplastic Composites – A Potential Game-Changer?, National Composites Centre Seminar, United Kingdom
  • (2013), A Differential Hardening Plasticity Model for Trabecular Bone, European Society of Biomechanics, Greece
  • (2013), A hierarchical dislocation-based model for high temperature fatigue, Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, Ireland
  • (2013), A Joint Coordinate Method Application to Multi-body WECs, Weekly Ocean Energy Seminar Series 2013, Ireland
  • (2013), A unified viscoplastic model for thermo-mechanical fatigue of service-aged P91 steel, ASME PVP-2013, France
  • (2013), Analysis of the Active Response of Cells to Cyclic Loading Using a Modified AFM System, Proceedings of the 19th Congress of the European Society of Biomechanics, Greece
  • (2013), Analysis of the active response of cells to cyclic loading using a modified AFM system, European Society of Biomechanics, Greece
  • (2013), Analysis of the Active Response of Cells to Cyclic Loading using a Modified AFM System, Proceedings of the ASME 2013 Summer Bioengineering Conference, United States of America
  • (2013), Finite element modelling of the thermo-mechanical behaviour of power plant steels, Joint Symposium of Irish Mechanics Society and Irish Society for Scientific & Engineering Computation, Ireland
  • (2013), High temperature, low cycle fatigue characterisation of P91 weld and heat affected zone material, ASME PVP-2013, France
  • (2013), Miniature Optical Fiber combined Pressure- and Temperature Sensors for Medical Applications, International Conference on Optoelectronics and Microelectronics, China
Education & Public Engagement